How to Add Philips Hue Dimmer Switch? (Step-by-Step Guide)

If you love to transform your living space with the perfect ambience, you might be searching for ‘how to add Philips Hue dimmer switch’ as this particular switch helps to control Philips Hue smart bulbs effortlessly. In this guide, we will be discussing precise steps on “How to add Philips Hue dimmer switch,” whether utilizing the advanced features of the Hue Bridge or the simplicity of Bluetooth connectivity. So, get ready to elevate your smart home experience and gain control over every nuance of your lighting environment. Let’s embark on this journey to seamlessly integrate technology and comfort in your living spaces.

What is Philip Hue Dimmer Switch, and How does It Work?

The Philips Hue Dimmer Switch is a wireless device designed for use with Philips Hue smart lighting systems. It allows you to control your Philips Hue smart bulbs without using your smartphone or voice commands.

The dimmer switch typically has four buttons: On/Off, Brightness Up, Brightness Down, and a customizable scene button.

The On/Off button turns the lights on or off, while the Brightness Up and Down buttons let you adjust the brightness levels.

Meanwhile, you can use the scene button to cycle through different pre-set lighting scenes or activate a scene of your choice.

The dimmer switch communicates with the Philips Hue Bridge, which is the central hub that connects and controls all the Philips Hue smart devices in your home.

When you press a button on the dimmer switch, it sends a signal to the Bridge, which then relays the command to the smart bulbs to carry out the desired action.

Another interesting feature is that the dimmer switch can be removed from its wall mount and used as a handheld remote, offering flexibility in controlling your smart lighting.

Accordingly, it provides a convenient and tactile way to manage your Philips Hue lights.

How to Add Philips Hue Dimmer Switch?

There are two ways to add a Philips Hue dimmer switch: using a Hue Bridge or leveraging Bluetooth.

We will be explaining both methods so you can pick the more convenient one for you.  

If you prefer connecting with a Hue Bridge, ensure that your Hue Bridge is linked and included in the Hue app. Then, proceed with the following steps:

  1. First, launch the Hue app.
  2. Navigate to the ‘Settings’ tab and select ‘Accessories.’
  3. Then, tap on ‘Add accessory.’
  4. Opt for ‘Hue dimmer switch.’
  5. If your dimmer switch features a plastic strip protruding from the battery compartment, remove it. Then, the dimmer switch should blink orange. If there’s no plastic strip or the dimmer switch doesn’t blink, press and hold the setup button on the back of the dimmer switch until it starts blinking.
  6. After the dimmer switch is detected by the app, follow the on-screen instructions. You can specify the Room or Zone controlled by the dimmer switch and customize the button functionalities.

To establish a Bluetooth connection, here are the steps you need to follow. 

  1. Firstly, position the dimmer switch within six inches of the light you wish to control.
  2. Then, keep pressing the button for three seconds till you can see the blinking green light.
  3. Repeat the same steps for up to 10 bulbs.
  4. To detach a light from the Hue dimmer switch, replicate the same procedure, but hold the off button for 10 seconds.

If you encounter any challenges when adding the dimmer switch, reach out to Philips Hue Support for assistance.

How Do I Add Philips Hue Dimmer Switch to Home Assistant?

You can add the Hue dimmer switch to Home Assistant by navigating to its settings section.

Home Assistant can automatically detect Philips Hue. If an instance is discovered, it will be displayed as “Discovered,” allowing you to set it up immediately. If automatic discovery doesn’t occur, there is no need to fret! There are only a few steps to manually integrate Philips Hue.

  1. Navigate to your Home Assistant instance.
  2. Go to ‘Settings’ and open the ‘Devices & Services’ tab. 
  3. Scroll down and click the ‘Add Integration’ button.
  4. Choose ‘Philips Hue’ from the list.
  5. Finally, you can follow the on-screen instructions to finalize the setup.

My Philips Hue Dimmer Switch is Not Working

My Philips Hue Dimmer Switch is Not Working (Troubleshooting guide)

When your Philips Hue dimmer switch is not working, resetting will be the solution according to the manufacturer’s recommendation. So, go through the resetting procedure below. 

  1. You have to power cycle the light. In order to do that, turn the light off, wait for 15 seconds, and turn it back on.
  2. Next, position the Hue dimmer switch within six inches of the light.
  3. Then, keep pressing both the “ON” and the “OFF” buttons for a minimum of 10 seconds until the LED indicator on the switch changes to green.

Watch this one,

Video Credits – Geek Street

You May Also Like

Leave a Comment