How to Connect Govee Lights Together? Customize Your Lighting Setup!

Govee lights offer an incredible array of possibilities. It allows you to transform your living space with captivating colours and dynamic effects. But why settle for just one light when you can connect multiple Govee lights together and create an immersive lighting experience? How to connect govee lights? In this article, we will walk you through connecting Govee lights.

Can you Cut Govee Light Strips?

The answer is yes. Govee LED light strips are made for cutting into different lengths using a knife or scissors..

You will see cutting lines marked on the strip as a guide. It is essential to follow these lines closely, as cutting outside of them may cause the entire strip to stop functioning correctly.

Most Govee light strip models can be safely cut. It’s crucial to check the specific brand and part number for compatibility.

The necessary components can be purchased separately if you need to make a new connection after cutting.

Can Different Govee Light Models be Connected Together?

The answer is yes. Different models of Govee light strips can be connected together. Various Govee LED Strip Lights can be connected in the same room using home assistants like Alexa or Google.

It means you can control and sync the lighting effects of different Govee light strip models within a single space.

If you have two pieces of the same LED Strip, you can connect them to extend the length or navigate corners and other obstacles. Because of this flexibility, you can create specialized lighting arrangements that meet your unique requirements and tastes.

You can achieve a unified and cohesive lighting experience throughout your room or home by connecting different Govee light models together.

Govee provides the versatility to mix and match their light strip models for enhanced lighting possibilities, whether you want to create a seamless transition between different light strips or synchronize their effects.

How Many Govee Light Strips Can you Connect Together?

You can connect two Govee light strips together using two different methods.

Firstly, you can use the Govee Connector. A small device that plugs into the back of each light strip, enabling a wireless connection between them. It eliminates the need for wires and provides a seamless connection.

The second option is that the light strips come with connectors that require matching the coloured wires and twisting them together.

You can connect the light strips securely by following the instructions and properly aligning the wires. Both methods offer reliable ways to connect two Govee light strips and expand your lighting setup.

How to Connect Govee Lights Together?

To connect Govee lights together, follow these step-by-step instructions.

  • Step 1- Choose the Number of Govee Lights you Want to Connect

Choose how many lights you wish to connect. Select the Elites with separate remote controls if you connect three or fewer lights. Pick masters with integrated wireless receivers when connecting four or more lights to prevent using a single remote for many sets.

  • Step 2- Invest in the Proper Brightness for Your Lighting Set

Think about the brightness that your lighting system should have. Select the correct brightness level depending on how bright or dim you want your lights to be.

  • Step 3- Connect the Lights

Cut away the ends of the wire to reveal the metal with wire cutters. Any wire can be used, provided it conducts electricity and can touch another wire. Securely connect the wires.

  • Step 4- Connect with the Power Source

Plugged the power supply into the open hole at one end of the light strand. In the opposite hole on the other end, fasten the plug with a screw.

  • Step 5- Making Everything Interconnected

Make sure moisture is kept away from the connectors. One end of the light string should be connected to the power source and leave the other end free. The strands should be tightly twisted together until every set is connected. Use solder or tape according to your option.

  • Step 6- Turn Your Lights Up

Start by drilling holes where you want the lights to go using a drill/screwdriver and a 4mm–6mm drill bit (5mm is ideal). Place the holes at least 2 inches apart to connect all three phases of lights.

  • Step 7: Check Your Lighting

Connect the power strip to the electrical outlet and turn on the lights using the appropriate switches. Verify that all of the lights are operating correctly.

Following these steps, you can successfully connect Govee lights and create a beautiful lighting setup. Always use caution, and if in doubt, refer to the manufacturer’s instructions or find expert advice.

How to Connect Govee Lights Together without a Connector?

Follow these steps to connect Govee lights together without a connector,

Step 1 – Collect All the Equipment You Need

Gather the required equipment like electrical tape, wire cutters, or strippers. Depending on your setup, you could also need other supplies like screws or mounting brackets.

Step 2 – Connectors from the Lights should be Removed

Use wire cutters or strippers to separate any connectors from the lights carefully. Safely dispose of these connectors. Make sure the wires are clear of debris and are clean before continuing.

Step 3 – Connect the Wires Together

For each pair of lights, connect pos + wire from one light to the neg- wire from the other. Make sure all connections are solid and secure to avoid problems in the future.

Step 4 – Check the Lighting

It is important to test the lights after connecting them all. Verify sure all of the lights are on and that there are no wiring issues. Now, go to the first stage  and see if everything is in order.

Step 5 – Wrap the Connections in Tape

Wrap each connecting point firmly with electrical tape. The connections will be kept safe, and this extra layer of security will reduce any potential problems.

Step 6 – Install the Lights

Install the lights in the desired area once they have been taped together and connected. Use screws or mounting brackets to keep the lights in place, according to your arrangement.

You can connect Govee lights together without a connector by following these steps. It is important to exercise caution and ensure all connections are secure for safe and reliable operation.

Can Govee lights be connected to smart home systems or voice assistants

Can Govee Lights be Connected to Smart Home Systems or Voice Assistants?

The answer is yes. Govee lights can be connected to smart home systems and voice assistants.

They are compatible with Google Home allowing you to control the lights using Google Assistant. So, you can use voice commands to adjust the lights, create scenes, set up routines, and integrate them with other smart home devices.

With this compatibility, you can conveniently control your Govee lights through voice commands, enhancing the automation and integration of your smart home setup.

The critical thing is H6001 model of Govee bulbs may have different compatibility. So, check the specific model’s compatibility with your desired smart home system or voice assistant.

How Many Metres of Govee Strips Can you Connect Together?

The maximum length of Govee light strips can be connected together depending on the specific model and power requirements.

It is essential to check the specifications and guidelines provided by Govee for the specific model you are using.

Exceeding the recommended length or power limits can lead to potential issues like dimming of lights or voltage drop.

It is best to adhere to the manufacturer’s guidelines regarding the maximum length of Govee light strips that can be connected together to ensure optimal performance and safety.

Watch this one,

Video Credits – GOVEE

You May Also Like

Leave a Comment