How to Keep LED Lights from Falling? Best Solutions!!!

Since they may be utilized for any lighting installation, whether industrial or domestic, LED strip lighting is already extensively employed. Their versatility, low-profile form, efficiency, and ease of use contribute to this. The only issue is that they always come off when it is least handy. We will demonstrate “how to keep led lights from falling” for you in the following article.

Why are My LED Lights Falling Off?

A Surface Flaw, Such as Dirt or Irregularity

The double-sided sticky force on LED strips would be inadequate or useless if the mounting ground is dirty or rough.

Inadequate Adhesive Strength

Due to the size of the LED strip industry, there are numerous knockoffs and low-quality products available today. Some items also contain out-of-date adhesives.

Adhesion-defeating Substance

The document’s durability is not assurance when put vertically or suspended from the roof. The double-sided adhesive that is not compatible with some surfaces could adhere for a time, but eventually, it will start to come off.

Wire Issue

A lengthy cable will weigh more than necessary if it is attached to the terminals of LED panels. If the line is improperly connected, it will fall, pulling the LED strip with it and causing it to fall.


The characteristics of adhesives are impacted by temperature variations. This could solidify by becoming fragile, making it likely to fall off.

How to Keep LED Lights from Falling?

You now have a better understanding of a few of the causes of LED strip dropping, and we’ll teach you how to stop it.

Sanitize the Area

Cleansing the area is an excellent first step since the double-sided adhesive will adhere much less firmly to a surface covered with dust or grime.

Supporting Tape

This is perfect if you want to attach the strip with the LEDs facing up on the rear. The LED stripes may eventually come off if you install them upside-down or with their downward facing on the sky. Therefore you should try different fixing methods.

Adjusting Clips

Adhesive clips are an excellent technique to hold the strip in position, but the only drawback is that you’ll need to take your time installing them and leave a little extra room around LED panels. The clamps are a durable installation that will be removed once you decide to do so.

Utilize Adhesive

After that, attach the LED tape to the item you are installing by linking it with glue like Basic Purpose. Utilizing this will make it more likely that they will stick and less likely that they will fall off during the next.

Molten Glue

Powerful glue contains corrosive chemicals, whereas hot glue doesn’t, making it safer and less likely to harm LED strips. The LED panel might melt if the hot glue becomes too hot, but that is all you must be aware of.

Rub-On Spirits

Once you attach any LEDs, you should wipe the surface with denatured alcohol to avoid having the LED strips slip off.

Can you Use Tape to Hold Up LED Lights?

There may be occasions when you feel obligated to bandage your LED, and doing so may have various benefits. Utilize mounting tape with a 2 lbs. or enhanced muscle rating that is double-sided and has a firm bond.

When you need to keep any strip LED or tiny LED lights inside one spot, the double-sided adhesive is the ideal sort of adhesive to use. Employ scotch tape and paint or fingernail polish to cover something if the light source doesn’t have an intensity adjustment feature, and you’d like to lower the intensity of the light. Duct tape may be used on LED lights without causing a fire because of this.

How to Make LED Lights Stick Again?

  • Step 1: Start by scraping off or removing the old glue off the rear of them.
  • Step 2: Make sure the surface you’re using for the light strands is clean and clear of debris.
  • Step 3: Prior to gluing them out, you should construct channels based on the type of walls.
  • Step 4: Reapply a fresh coat of glue to the backside of LED light strands in a uniform layer.
  • Step 5: Align the sides properly before securing them to the wall to ensure they remain level and clean.
  • Step 6: Ensure the LED light panels are dry when putting them back about after correctly reapplying them.
  • Step 7: You must be able to examine your LED strips once more to ensure they are operating correctly once the glue has had time to dry.
  • Step 8: Constantly cover the glue.

What Type of Glue Should be Used for LED Strip Lights that Keep Falling?

Due to its excellent Yellow deterioration resistance and excellent Low good thermal stability, PU (polyurethane) adhesive is superior to epoxy resin glue. Yet, both its cost and toxicity are higher. When PU glue solidifies, it produces several low molecular components that are poisonous and dangerous for workers to breathe in.

Silicone glue combines the best qualities of epoxy plus PU glue, namely low toxicity, excellent heat resilience, lower thermal resistance, and strong resistance to yellowing. The glue has a pleasant scent and won’t turn yellow when used for a long period.

How to Stick LED Lights on Wall Without Adhesive?

Command Sheets

Try utilizing Command sheets if you want a damage-free solution. All of those are tiny sticky strips that may be inserted and removed cleanly. They’re ideal for short-term installs or folks who do not wish to cope with adhesive hassles.

Strips of Velcro

Velcro strips are the ideal tool for hanging LED lights. These are additionally simple to uninstall and won’t leave any trace. They are suitable for short-term installs or those who prefer to avoid dealing with glue.


Try utilizing magnetic if you want to mount LED light panels on walls in a semi-permanent manner. This is a fantastic alternative if you’re concerned about wall harm or desire to be capable of removing your LED strip lighting without difficulty.

Screws or Spikes

Use screws or nails if you’re searching for a more long-lasting solution for how to install led strip lighting.

Recommended for You: Similar Articles to Explore

Leave a Comment